Twitter: lvl1hackerspace

Surface Mount Soldering Workshop

Photo Licensed CC-BY-NC-SA, Flickr User atduskgreg

The LVL1 Hackerspace will be hosting a Surface Mount Soldering

Workshop on Saturday, November 20th, 2010 from 1 to 5pm.  This
workshop will teach you the basics of soldering surface mount
components with a standard soldering iron, using a standard soldering
iron tip.   You’ll be given the tools required to build your own
surface mount projects, and during the workshop, you’ll work on
assembling your own Open Balloon CPU (A design of LVL1′s own White
Star Balloon Team).  You’ll solder 0805 Resistors and Capacitors, 1206
LEDs, and TQFP Microcontrollers, among others.  You’ll learn about the
packages  which can be hand soldered, and the packages which cannot,
along with the techniques required to assemble a working board.

At the end of the workshop, you’ll walk out with the knowledge and
skills required to build any reasonable surface mount project, along
with your own Open Balloon CPU.  These tools include small-gauge
solder, flux, non-magnetic tweezers, and a magnifying loupe.  The Open
Balloon CPU you’ll be assembling is a VERY general purpose sensor
platform, which can be used for a variety of projects which aren’t
related to Balloons or UAVs whatsoever.  Aside from the form factor of
the PCB, everything about the electronics design is generalized for
whatever development the user sees fit.  We will be outfitting the
Balloon CPU with a temperature sensor and Microcontroller, along with
all the passive components required to burn code onto the chip.  If
desired, workshop attendees may add additional sensors (a Real Time
Clock and/or a Barometer) for additional cost.

If you can read newsprint, and have a reasonably steady hand, you can
solder surface mount components!  We will also be doing demonstrations
of hot-air soldering and hotplate reflow soldering, to provide a small
taste of even more advanced soldering techniques.  We can provide
soldering irons, but if you would prefer to bring your own, feel free.
We also recommend you bring a laptop.  If you’ve got an FTDI cable
and AVR programmer, you can start hacking at your balloon CPU

For a preview of the skills we’ll be teaching, watch this Youtube

Note:  If we do not fill at least 12 seats by November 10th, 2010, the
workshop will be cancelled, and all tickets will be refunded.  Sign up
early, and sign up often!  Any questions, feel free to send them to
bradluyster (at)

Sign up early, and sign up often!  Seating is limited.  Buy tickets at eventbrite:

Category: diy, events, soldering, workshop, workshops

Tagged: , ,

Leave a Reply

LVL1 Makership

Support a LVL1 Makership for $5 a month.

Upcoming Events


814 East Broadway