Skip to content

About Christopher

Micro Colonel of LVL1

Tue, May 11, 2010, 8:00 PM - 10:00 PM
119 Chenoweth Lane, St Matthews, KY

The last round of space voting missed the "Go" vote on Hope Mills by only 1 vote! Could this next round tip the balance? A recent push for Okinawa Health Spa has made it a contender for the top spot. Could this challenger be a LVL1 game changer?! Come to the meeting tonight to find out!

Also, Brian has T-shirts!

This is a repost of the Google Groups announcement.

The hunt is on! We've crossed off some of the more
expensive options already. But we have a few contenders in the
running. Here's the our wiki page with the contenders with links back
to their discussion threads:

http://wiki.lvl1.org/Possible_locations

So here's how we're going to make a decision.. Starting next meeting,
a quorum of our members will rank all the scouted options from most
preferable to least preferable. Results will be tallied to determine
the most preferred location. At that point, we have a brief discussion
about *only* the top pick. Whomever shows up, members and non-members,
can advocate for it or against it. Then members will follow that with
a vote to either "Pull the trigger on this location" OR "Pass until
next meeting" We will do this at every meeting henceforth, rinse and
repeat, until we get a space.

If you have a space in mind, it's important to get it scouted before
the next meeting. No one can know if a decision will be reached next
meeting or not. Every meeting is a big meeting from now on... until we
are meeting at our new location!

My sincerest gratitude and appreciation goes out to everyone who has
contributed financially and otherwise. Progress doesn't happen unless
people make it happen. And at every step you all have made it happen!
We'll have a space soon! And we're just getting started...

1

Here's some video of the Klee sequencer in action. Along with details on finishing up from previous posts. Continued from

So we left off with a PCB ready to go. I used my trusty tin snips to cleanly cut off the excess board. It's a tight fit underneath the panel.
Trimmed panel

...continue reading "Finishing the custom front panel Klee"

1

Saturday March 27th LVL1 is putting on an Electronic Mischief Soldering workshop. We'll be building TV-B-Gones and a surprise kit for computer pranks. Register online at eventbrite at the link below.

http://lvl1electronicmischief.eventbrite.com/